1 / 1
BlackOne - DIY MMCU
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
for easy load and unload filament.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 72
- Makes
- 0
- Views
- 767
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A MMCU (Multi Material Control Unit) for easy load and unload filament
This was build of leftovers from a Anycubic Chiron
This is not a step by step Guide to build one.
You have do changes in Klipper CFG and maybe in the STEP file!
Required:
- knowledge of electronics
- knowledge of CAD
- knowledge of Klipper and Klipper Macro's
CAD overview:
In live:
SpoolChange:
Parts what i used:
- 3x 2020V - 530mm profile
- 2x 2040V - 590mm profile
- 16x 608 ZZ bearing
- 55x M5x10 Screws (ISO 7380-1)
- 55x M5 T-Nuts
- 32x M3x8 imbus screws
- 8x M3x16
- 8x M3 Nuts
- 4x 603 U 3x10x3mm bearing
- 4x 0,7x5x10MM Compression Spring
- 4x M4 Nuts
- 4x M4x14 imbus screws
- 10x M4x10 imbus screws
- 9x PC4-M10 pneumatic coupling
- 4x MK8 extruder gear
- 5x Nema 17 Stepper
- 8x SS-5GL2 limit switch
- 1x 24V Powersupply
- 1x TriGorilla mainboard
- 2x 3510 24V Fan
- 4x PL9823 RGB led
- 4x 16mm pressswitch
- A lot of cable :D
Use the STEP file to modding for your own need's
Use at your own risk: My Klipper config available in downloads you have to change the confings for your printer!