1 / 1
Klipper pressure advance tuning tower
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Klipper pressure advance tuning tower
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 269
- Makes
- 1
- Views
- 1,156
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- GNU General Public License v2.0
Slicer settings:
Vase mode
1 botom layer or brim
0.2 layer height
max speed: 100mm/s
Prepare for the test by issuing the following G-Code command:
SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=1 ACCEL=500
This command makes the nozzle travel slower through corners to emphasize the effects of extruder pressure. Then for printers with a direct drive extruder run the command:
TUNING_TOWER COMMAND=SET_PRESSURE_ADVANCE PARAMETER=ADVANCE START=0 FACTOR=.005
For long bowden extruders use:
TUNING_TOWER COMMAND=SET_PRESSURE_ADVANCE PARAMETER=ADVANCE START=0 FACTOR=.020
The pressure_advance value can then be calculated as pressure_advance = <start> + <measured_height> * <factor>. (For example, 0 + 12.90 * .020 would be .258.)