1 / 1
Laowa Aurogon Supports - Cross base.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Supports for the Laowa Aurogon lens with a cross base. Initial Design and Prototyping by Allan Walls. Fusion 360 by me.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 50
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
These supports are designed to have quick release plates attached to the bottom.
The underside of the QR clamps should have a ‘cross’ recess. The base of the tube clamps have a cross to fit the recess.
You will need 2 70mm clamps and one of the remaining at minimum.
There is 3.2mm space for neoprene tape between you lens and the clamp.
Recommended print settings:
Perimeters = 4
Layer Height = 0.30