Pixel Watch 2 / 3 Charging Stand simple
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapted design by adding an inner ring that can be added in the slicer using the "Add part - Load.." function.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 114
- Makes
- 4
- Views
- 1,632
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The adapter ring will NOT fit when printed separately (there are intended overlaps / the ring is too big alone). Load the main model ("pixel-watch-charger.stl") first - do not move the model! Then right-click it and select “Add part” then “Load..” and choose the "inner-adapter-ring".stl". Now you can move the model as requried.
After printing, the original charger cable should snap-fit in, depending on your printer's tolerances.
Print with the charger-slot on the print plate for easy support removal.
edit1: added missing base plate.