Case for CNC Kitchen Threaded Insert Soldering Tips TS100 Edition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remixed the original case from CNC Kitchen to fit to their newly introduced variant for the TS100 / Pinecil
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 85
- Makes
- 4
- Views
- 966
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
What I canged compared to the original case from CNC Kitchen:
I reduced the free space above the tips in the lid of the case and added a Tip Adapter holder on the side of the lid.
The Tip Adapter is attached to the case by his M5 thread for the tips. For this you will need a “M5 Short” (~M5x6x7) threaded insert that you can already insert with your new adapter ;-)
As it is not that easy to insert the threaded insert through the upper hole without melting this, I made two versions. On with a blind hole for the experienced guys and a more simple one with a through hole that you can insert from the lower end.
You still need to print the basic case from the original version, as I did not do any changes on that. There a two versions available from Stefan, which you can choose from.