1 / 1
Seestar S50 Sun Protection for Body
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The body of the seestar becomes very hot when observing the sun, so I made a simple protection for it.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 231
- Makes
- 0
- Views
- 3,065
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
The Seestar S50 becomes quite hot, when observing the sun. So I made a simple protection for the body which have to be glued together.
The plate is printed at 0.3mm 20%, the holder at 0.2mm and 60%.
Because the plate should be 270mm (if the sun is not high in the morning) and most printers can only print 250mm, there is a prolongation to be added, which has to be glued to the plate…
It will be installed after the sun filter of the lens.