1 / 4
Backlight for custom airflow, ELEGOO NEPTUNE 3 PRO/PLUS/MAX DUAL 5015 BLOWER FANS SHROUD W/ 8MM NOZZEL CAM CLAMP.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Backlight for custom airflow, ELEGOO NEPTUNE 3 PRO/PLUS/MAX DUAL 5015 BLOWER FANS SHROUD W/ 8MM NOZZEL CAM CLAMP.
- Rating
- 0 / 5
- Likes
- 59
- Downloads
- 164
- Makes
- 0
- Views
- 2,466
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
4 LEDs 3mm 3volt. A board that lowers the voltage from 24V to 12V is not needed!! A resistor of 560 Ohm or 680 Ohm, 0.25 W is sufficient
Power it from the hotend fan connector.
It turns on automatically when the temperature exceeds 50 degrees Celsius, and goes out when it cools below 50 degrees Celsius.