1 / 2
"Apple" BlueSCSI v2 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed this late 80s / early 90s style case for the new (external) BlueSCSI v2 board
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 145
- Makes
- 0
- Views
- 1,682
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is the model for the “Apple” inspired case for the external BlueSCSI v2.
- The enclosure was designed to lock together with the use of 5x2mm magnets. I used these: https://a.co/d/1b7HHj1 - make sure you get the polarities right when gluing them in!
- The case height is made to be the exact hight needed to plug into the back of a compact mac. I have not tested it on any other type of computer.
- The opening for the Apple badge is for the smaller keyboard size badge, not the larger one that goes on the front of the macs.
- You can use superglue or UV cure glue to “fill in” the opening for the LED
- This was designed and printed on an Elegoo Saturn 2 8k at a 50um layer height ant a 60.31 degree angle off the bed. (use this calculator for best results)
Enjoy!