Clef Keychain Set
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keychain Trio: Treble, Alto, and Bass Clefs. The models can be printed in two colors, even without a MMU or adhesives
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 84
- Makes
- 0
- Views
- 365
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I've created these musical clef key fobs that are smooth on both sides. They are designed for dual-color printing in black and white and don't require a Multi-Material Unit (MMU) or adhesives. In the design, the white background is separated from the key tag within the *.3mf model files and consists of a single layer (0.2mm).
If you have a multi-color printer, the process is straightforward. If not, you can follow these steps, as I successfully used PLA
- Ensure your print bed is clean.
- Load the white filament.
- Begin by printing the white background (
c/f/g-clef_white_*.gcode) and keep it on the print bed! The black part will be printed on top. Don't worry, pre-print calibration is not affected if you leave the white part on the print bed.
- Pre-heat the bed to PLA temperature (do not allow it to cool down!).
- Switch the filament to black.
- Print the corresponding
key_tag_*.gcodefile, either with or without ironing, as indicated by the file name. - Ideally, the nozzle should not scratch the white piece and should fill any empty holes.
If executed correctly, both colors will seamlessly come together. Enjoy your creation!
Edit: I've also added a two-sided version with both clefs, F and G - as a greeting to all the piano players out there.
