89mm Vertical Blinds Weight Socket
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.33 – €0.41 net (excluding VAT)
For file: Vertical_Blinds_Weight_Socket.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.37 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 24 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A plate socket for weighing down vertical blind curtains
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 62
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v3.0
Using the original design (thanks to Irgendeintyp), I turned it into a socket to repair the broken parts. In this form, the weights were reused by cutting the broken handles and trimming the edges. This saved printing time and filament greatly. The weight close to the original was also preserved.
Sample configuration (for just one sample):
3D Printer: Elegoo Neptune 3 Pro
Filament: PLA+ White
Slicer: UltiMaker Cura
Resolution: 0.2mm
Infill: 100%, Grid
Wall Line Count: 2
Support: No
Adhesion: Yes (Recommended, because the edges may curl up when printing in large numbers and for long periods of time)
Time: 24m
Weight: 4g (1.48m)
Comments: Have repaired about 40 of them with this method, which had become dry and brittle due to exposure to the sun. Very practical as it does not require gluing etc. The result was satisfactory.