Base for Top2Glue Containers
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.82 – €1.00 net (excluding VAT)
For file: top2-glue-screw-base_0.2mm_PLA_MINI_56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.91 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 55.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a base plate to reduce the risk of tipping over your Top2Glue containers
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 20
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a base plate for super glue containers from the German brand Top2Glue. I regularly forget to clean the spout before putting the cap on, which sooner or later always forces me to unscrew the cap and use a toothpick to apply glue. This comes with the risk of tipping over the bottle which has devastating consequences. The Idea and motivation is of course applicable to other brands, but the measurements in my design correspond to Top2Glue ( red, green, yellow and black .)
Variations
My initial concept for this design was just a simple base plate that increases the footprint and thus reduces the risk of tipping. As an afterthought I added a second version with screw holes. That might be helpful when you have a dedicated model building area.
Print Instructions
I printed mine in PLA, but PETG, ASA or exotic materials will work fine as well. Increase the Infill amount a bit from what you would normally use, to assure a clean surface at the shallow angle.
The *.stl file for the screw-on version contains modifier geometry, that can be separated in PrusaSlicer using the “Split to Parts” command. Right-click select each body, set it's type to “Modifier” and then add an override for Infill with a value of 100%. For a model like this, it may be a bit of an overkill, but I liked the idea of having all solid layers below a fixture point. If you want to optimize for print time, sets the bottom layer count to zero.

Customization
Find the provided Fusion 360 file in the download section and ( Modify → ) Change User Parameters as required. The default height is 10 mm, the inner diameter 31.1 mm and the external diameter 75 mm.

Related Models
https://www.printables.com/model/571270-skadis-sekundenkleberhalter-top2glue-t-nuts