Bounce fabric softener wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mounted Fabric sheet holder.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 46
- Makes
- 1
- Views
- 205
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to get the fabric sheet box off the shelf, so I made a box that would mount on the wall and hold the Bounce fabric sheets. You can put the whole box in or you could put just the fabric sheets from the box directly into it. I have not tested other brands for fit so the measurement may vary. If needed, you could upscale it if your brand is a little larger.
I printed this without any supports. Fans were at 100% using the Minimus Cooling Mod.
https://www.thingiverse.com/thing:5800381
Printer: Ender3 v2 (0.6mm Nozzle)
Bed: 50 Deg.
Hotend: 215 Deg.
Support: No
Brim: No
Filament used : Sunlu PLA