1 / 2
Twizy glove compartmentlatch / Handschufachriegel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement part for the glove compartment latch of a Twizy
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 31
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you found this you need it ;)
It is tight fit, and need some cleanup on the side where the clip thingy will hole it to the lock.
Btw it is 0.7mm thick and I have to grind down a M6 E-Clip wich was 1mm.
I CA glue it to M6 nut, the nut was screwed to a M6 bold and contered with a 2nd nut. So I had a good leaver to hold it to grind it down.
The glue can be removed with a lighter