1 / 11
DIN-Rail Adapter for Raspberry Pi 4 Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to mount the Raspberry Pi 4 case from JOY-IT to a DIN-Rail.
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 155
- Makes
- 1
- Views
- 2,525
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This is an adapter to mount the Raspberry Pi 4 case ALUCASEP4+08 from JOY-IT to a DIN-Rail.
I did not find a good solution for a DIN-Rail case so I decided to use this standard case and applying an adapter. The case is fully out of aluminum and gives a good passive cooling to the Raspberry Pi 4. By (ab)using the cable slot of the extension slot cable no drilling or other work is necessary on the case.
There is also variants to attach an SSD for a file server application.
Variants
Option 1: RPI4 only
- 1x M3x25 screw
- 1x M3 nut
- 2x tapping screw 2.2x4.5mm
Option 2: RPI4 with Intenso Portable SSD Premium
- 1x M3x25 screw
- 1x M3 nut
- 2x tapping screw 2.2x4.5mm1x M3x25 screw
Option 3: RPI4 with Intenso SSD TX800
- 1x M3x25 screw
- 1x M3 nut
- 2x tapping screw 2.2x4.5mm
- 2x tapping screw 2.2x9.5mm
Printing
- The parts are printed in PETG. But other material may be used as well.
- The spring for the snapper should be printed in TPU. I used Das Filament TPU V2 which has a Shore hardness of 94A.