1 / 4
Nextruder Filamentinsert 10mm, passthru
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
anti-jam Bowden connection
- Rating
- 4.5 / 5
- Likes
- 5
- Downloads
- 28
- Makes
- 2
- Views
- 172
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I first used the 5mm connector wich came with the enclosure. But often the filament jammed in there, if not cut perfect or if it was a little bend. The 10mm connecters allow the tube to pass thru, so i modified the guide with a 10mm thread and a hole for a 3mm insert to fasten the guide.
i printed it in ASA. It fits tight. Push the tube in as far as it goes. No more jamming :)
And… the tube is released easier, because the black ring is bigger than the blue one.