Rollers for filament spools for (Un)original Prusa Drybox - 6 spools
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rollers for 6 filament spools for (Un)original Prusa Drybox
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 116
- Makes
- 0
- Views
- 1,533
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Model based on:
https://www.printables.com/pl/model/590837-drying-box-roller-shims
I designed brand new rollers and shims. My version fits 70mm wide filament spools (fits Prusament and others). The original version is designed for spools with a maximum width of 66mm.
You need to purchase the same as the original design:
- 2 x 8mm diameter linear shaft with a length of 493mm
- 24 x 608ZZ bearings
You have to print:
- 12 x roller
- 4 x rod ends (from original project)
- 14 x shims between bearings
Print settings:
Recommends printing with PETG, 3 walls without supports. For Roller and shims 100% infill, for rod ends 25% infill.
Installation:
Install the bearings in to roller. Place the rollers with bearings on the rod, alternating them with shims. Put rod ends on the ends of the rod.