1 / 3
Halloween-Bat Wallart (53 pieces) // Halloween-Fledermaus Kunstwerk (53 Teile) — image 1
1 / 3

Halloween-Bat Wallart (53 pieces) // Halloween-Fledermaus Kunstwerk (53 Teile)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Geometric wall art of a bat for halloween // Geometrische Wandkunst einer Fledermaus für Halloween

Rating
0 / 5
Likes
74
Downloads
252
Makes
0
Views
1,606
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

You want to bring some Halloween-Feeling to your wall? How about this scary bat? 

Original size of the file is around 52x20 cm (20,5"x7,9"). But you can scale it up as far as you like or going down to about 50% (smaller triangles will not look smooth and the numbers on backside are not readable anymore). All parts can be print at full size or 200% on a standard printer bed.

All parts are numbered on the back and you can find the numbers assignment in the file downloads.

How to get it to the wall:

  • Freestyle: You have a steady hand and a good eye? Then your fine to go directly without any help. Just start in numerical order (only part 4 and 5 will be needed later, but they are to small for a 2 digit number). For a little help: Gaps between the wings should be always 4 mm, between the body parts liek eyes and mouth only 3 mm.
  • Use a paper mask: Print the PDF file with the same scale then your print. Cut out the pieces and tape it to the wall. Add all the pieces like a puzzle
  • Use a projector: Just project the PDF to the wall and scale it according to one sample piece
  • Use double sided tape,  hot glue or power stripes to fix the pieces to the wall

 

----------------------

 

Du willst ein bisschen Halloween-Feeling an deine Wand bringen? Wie wäre es mit dieser gruseligen Fledermaus?

Die Originalgröße der Datei beträgt etwa 52x20 cm (20,5 "x7,9"). Du kannst es aber beliebig vergrößern oder bis auf ca. 50% verkleinern (kleinere Dreiecke sehen dann nicht mehr glatt aus und die Zahlen auf der Rückseite sind nicht mehr lesbar). Alle Teile können in voller Größe oder mit 200% auf einem Standard-Druckerbett gedruckt werden.

Alle Teile sind auf der Rückseite nummeriert und du findest die Nummernzuordnung in den Dateidownloads.

Wie man es an die Wand bekommt:

  • Freestyle: Du hast eine ruhige Hand und ein gutes Auge? Dann kannst du direkt loslegen, ohne jede Hilfe. Fang einfach in der Reihenfolge der Zahlen an (nur Teil 4 und 5 werden später benötigt, aber die sind zu klein für eine zweistellige Zahl). Als kleine Hilfe: Die Abstände zwischen den Flügeln sollten immer 4 mm betragen, zwischen den Körperteilen wie Augen und Mund nur 3 mm.
  • Verwenden eine Papier-Schablone: Drucke die PDF-Datei mit dem gleichen Maßstab aus wie deinen Ausdruck. Schneide die Teile aus und klebe sie an die Wand. Füge alle Teile wie ein Puzzle zusammen
  • Verwende einen Projektor: Projiziere die PDF-Datei einfach an die Wand und skaliere sie entsprechend einem Musterstück
  • Verwende doppelseitiges Klebeband, Heißkleber oder Powerstrips, um die Teile an der Wand zu befestigen

Tags