1 / 2
KP3S SKR Pico Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to mount the BTT SKR Pico in the Kingroon KP3S
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 94
- Makes
- 3
- Views
- 492
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter allows for mounting a BTT SKR Pico in the Kingroon KP3S. Use 2mm heat-set threaded inserts for the SKR Pico mounting screws, and the original screws/standoffs to mount to the case. If you do not have heat-set inserts, regular 2mm nuts/bolts should be OK, but be harder to work with.
Features:
- Seats the SKR Pico at roughly the same height as the original
- Supports the SKR Pico to reduce stress on the board/connectors during installation
- Fins and grid section improve airflow to back-side of board
- Grid section allows running and zip-tieing cables behind the board for tidier cable management
- Oversized for easier printing and sturdiness
Print Settings
- Printer: Kingroon KP3S
- Rafts: No
- Supports: No
- Resolution: 0.28mm
- Infill: 15%
- Filament material: PLA
I printed this using a built-in “Extra Draft” profile, since it is not a visible part. The result was far stronger than necessary, which means you can probably use whatever settings work best for your printer.