Frankenberry Inspired Mini Frankenstein Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I present this recolored homage to my favorite line of 1980's Cereals: Monster Cereals - Frankenberry!
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 41
- Makes
- 0
- Views
- 346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution
Inspired by @3DPrinty Sculptember models, I present this recolored homage to my favorite line of 1980's Monster Cereals - Frankenberry!
There are no alterations to the original model - this is simply a recolor/remix using PrusaSlicer's Multimaterial painting inspired by the color scheme of the Frankenberry cereal mascot.
The provided .3MF file was created in PrusaSlicer 2.6.1 at .25mm Quality mode for the default Prusa XL 5 tool changer profile.
The model photos are from my stock Prusa XL 5-tool changer at .25mm quality with the following small changes to the Printer and Filament profiles:
Printer Profile:
- Idle Temperature set to 140C (vs the default 170C)
Filament Profile: Default Prusament PLA
- Lowered First Layer and Other layers to 200C (vs the default 215C)
I found these settings helped reduce stringing when printing this model in 5 colors on my Prusa XL(using Prusament and PolyMaker PolyLite PLA). Of course, your mileage may vary ;)
Supports:
- None needed when printed in the orientation shown (his flat-top on the bed surface).
Colors used:
- Tool 1: Polymaker PolyLite PLA Pink
- Tool 2: Polymaker PolyLite PLA Magenta
- Tool 3: Prusament PLA Pearl Mouse
- Tool 4: Prusament PLA Galaxy Black (pupils)
- Tool 5: Polymaker PolyLite PLA White
If time permits, I hope to continue the recolored homages to the other Monster Cereal Mascots ;)