Pumpkin Wall Art (made w/ HueForge)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm Filaments Used: PLA Sunlu Black…
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 31
- Makes
- 1
- Views
- 251
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm
Filaments Used:
PLA Sunlu Black Transmission Distance: 0.6
PLA PolyLite Army Green Transmission Distance: 1.8
PLA Sunlu Orange Transmission Distance: 2.7
PLA Elegoo Yellow Transmission Distance: 3
PLA Sunlu White Transmission Distance: 5.8
Swap Instructions:
Start with Black
At layer #17 (0.84mm) swap to Army Green
At layer #21 (1mm) swap to Orange
At layer #29 (1.32mm) swap to Yellow
At layer #34 (1.52mm) swap to White for the rest.
Category: 2D Art