1 / 2
Split to fit - Linear Rail Bath - Clean your linear rails
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a parametric model of an alcohol bath for cleaning your linear rails. Split to fit.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 125
- Makes
- 3
- Views
- 812
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
An OnShape Parametric Model for cleaning your linear rails without taking them apart.
I was inspired by MakerMike's model, but this is from scratch. I assume your print bed is smaller than the size you would need to print the bath diagonally on the same printer, so it's split. It is split in half symmetrically, so print 2 and glue them together. I also added ribbing for your pleasure, additional sturdiness and to allow circulation of alcohol under the rail.
To improve “water tightness”:
- 0.4mm nozzle
- outer wall width: 0.375mm
- inner wall width: 0.45