1 / 16
Automatic greenhouse watering / Automatische Gewächshausbewässerung — image 1
1 / 16

Automatic greenhouse watering / Automatische Gewächshausbewässerung

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I thought about how I can ensure that my plants in my greenhouse can be watered when I'm not at at home.

Rating
0 / 5
Likes
36
Downloads
33
Makes
0
Views
2,082
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

For the vacation season, I thought about how I can ensure that my plants in my greenhouse can be watered when I am not at home.

The result is an automated irrigation based on Homebridge (interface to Apple's Homekit) a Raspberry Pi and the plant sensor from Xiaomi FlowerCare.

 

The exemplary process:

The plant sensor records values ​​for soil moisture, bond fertility, temperature and light intensity. These values ​​are queried in a 5-minute interval from the Homebridge, which runs on a Raspberry Pi.

As soon as the soil moisture drops below 30%, an automation system that is set up via Apple Homekit switches on a WiFi socket on which a water pump is attached, which transports the water for irrigation into the greenhouse.

 

The case for the Raspberry Pi and the ultrasonic sensor ist splitted into 2 parts to fit the 3D printers size.

 

So that the pump doesn't run dry, I connected an ultrasonic sensor to the Raspberry Pi, which checks every 5 minutes whether the water tank still contains enough water.

If this is not the case, the Raspberry sends a webhook to the Homebridge, which then sends a notification to Apple Homekit.

The rule for automation also checks in advance whether there is enough water in the tank.

 

I also printed a cover for the plant sensor so that it is not damaged when the irrigation is running in the greenhouse. So that the values ​​of the light intensity still fit reasonably, I printed the cover very thinly and with transparent filament.

 

Hardware:

  • Xiaomi FlowerCare Sensor
  • Waterpump
  • 10 liter bucket
  • Wifi socket
  • Raspberry Pi
  • Ultrasonic sensor
  • PVC Tube 5 meters 16 millimeter diameter

Software:

  • Homebridge Image
  • Apple Homekit
  • Python script for reading and calculating the water level

Printed Parts:

  • Raspberry Pi Case / Ultrasonic case
  • Tube Adapter
  • Sprinkler

Tags