Lock, Shock, and Barrel
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.06 – €6.19 net (excluding VAT)
For file: Lock Shock Barrel_0.2mm_PLA_MK3S_5h36m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.63 excluding VAT (range midpoint).
- Weight reported by the author
- 71 g
- Print time reported by the author
- 5.6 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Lock, Shock, and Barrel from The Nightmare Before Christmas
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 172
- Makes
- 2
- Views
- 1,247
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lock, Shock, and Barrel are the Oogie's Boys from Tim Burton's The Nightmare Before Christmas.
Single extruder multi-color print
- First layer: White
- Second layer: Green (Shock's face. I used a very light green, but feel like a pale green or yellow would work since this is masks off)
- Third layer: Purple
- Fourth layer: Red
- Fifth layer: Grey (bathtub color could be grey, silver, or some sort of off-white)
- Sixth layer: Black