40x40-spool holder mod for Neptune 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Neptune 2 has a spool holder that already has an angle to the spool holder. And the 40x40 extrusion is a little…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 24
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
My Neptune 2 has a spool holder that already has an angle to the spool holder. And the 40x40 extrusion is a little different than an Ender in that the "top" of the extrusion is closed. Only the sides are open.
So I had to adjust the angle of the bracket to nearly vertical and I had to rotate the part that goes into the slot to go into the sides. I then added a little more material to give it more strength.
I also added more clearance to the part that goes into the slot. I'm using a 0.6mm nozzle and it couldn't handle the details of the original.
Edit: I added a "two slot" version just to make it a little more stable.
Print Settings
Printer:
Elegoo Neptune 2
Rafts:
No
Supports:
No
Resolution:
0.4 mm
Infill:
50%
Filament:
Duramic PETGWhite
Notes:
Printed with a 0.6mm nozzle and 0.4mm layer height.
Category: 3D Printer Accessories