Makita mitre saw vacuum hose adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Makita mitre saw dust port is not compatible with a standard domestic vacuum hose, it needs an adapter.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 323
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Makita mitre saw model LS0815 (and I'm pretty sure the other models too) is is fitted with a dust collection bag. This is a comprimised solution - the lack of positive suction and small capacity means you'll soon be covered in dust.
The dust collection bag can be removed, leaving a 45mm port where a vacuum hose can be connected for better dust management. The problem is, your standard shop vac / domestic vac does not come with a 45mm hose.
This adapter gets you around the problem, permanently. The OD is slightly undersized, so you can tape it up with insulation tape to create a 100% leak tight joint with the mitre saw dust port.