18650 to 20700 Lithium Cell Charge Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convertor to charge the 20700 larger batteries in an 18650 charge unit
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 57
- Makes
- 0
- Views
- 282
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Printed in two parts to avoid supports and have better adhesion. 20700 section can be used as a standalone for other projects. Battery clips are Keystone #209. I bought mine a few years ago from EBay but I found them on Amazon. The prethreaded holes in the bottom section are 5mm. Ends support up to 12mm depth and top support up to 10mm. 10-24 or 10-32 SAE screws can be force threaded into these holes. They are about the same size. I first used round headed screws into the ends, but it worked better with flat head with my particular charger. When using pay attention to polarity.
I used a generic PLA with 20% infill, 0.8 wall and sides, 0.2 layers Designed with Tinkercad, printed on Ender 3 with PEI build plate.