1 / 1
Ground support for downspout rain gutter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bracket will keep the end of your rain gutter supported off the ground.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 166
- Makes
- 2
- Views
- 688
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This bracket will keep the end of your rain gutter supported off the ground.
It is sized for 2"x3" (nominal) downspout, a common residential size in North America. The actual inner width is 83mm.
The bracket is designed to support the gutter 120mm off of the ground.
Design features
- Pre-"drilled" attachment holes for #6 or #8 screws. The holes are offset to reduce rotation of the bracket.
- H-frame design to provide support without using excessive material.
- Chamfered and rounded edges for easier handling.
Printing instructions
- Print the bracket as oriented in the .stl file (upside down).
- You shouldn’t need any supports.
- Choose a material suitable for the outdoor application.
Installation instructions
- Slide the bracket onto the gutter (the gutter fits into the smaller end with straight edges).
- Use #6 or #8 screws to secure it. For metal downspouts, consider self-tapping metal screws.
Notes
- Like most of my models, I've designed this with OpenSCAD and it is fully parameterized. If you would like a modification (e.g., dimensions, height off the ground, screw hole sizes), just send me a message.