Rohový držák hranolu/Corner hanger for wooden prism
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Věšák pro zavěšení dřevěného hranolu do rohu místnosti. Hanger for hanging a wooden prism in the corner of a room.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 23
- Makes
- 0
- Views
- 167
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
[CZ] Pro zavěšení dřevěného hranolu do rohu místnosti. Kapsa pro hranol je široká 57 cm a pro jeho zavěšení je potřeba vytisknout 2 kusy a jeden zrcadlově otočený. Hranol je nutné zaříznout na obou stranách pod úhlem 45 °. Pověsil jsem na hranol 80 Kg a držel v pohodě.
[EN] For hanging a wooden prism in the corner of the room. The gap for the prism is 57 cm wide and to hang it, you need to print 2 pieces and one mirrored. The edging must be cut on both sides at an angle of 45°. I hung the 80 Kg prism and it held just fine.
Printers setting
- with support on bed
- PETG
- 0.2 mm layer