1 / 3
Hinge pin for Makita MakPac box - Short Version — image 1
1 / 3

Hinge pin for Makita MakPac box - Short Version

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hinge pin for MakPac boxes, improved length.

Rating
5 / 5
Likes
26
Downloads
74
Makes
1
Views
1,345
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

For whatever reason, Makita build that strange material and space consuming hinge system.

I fixed that for them.

Print in preferably PETG at 0,2mm with 100% infill. Bolt in place with a countersunk screw. Anything from 3x15 to 4x20mm will work.

Mounting suggestion
  • Remove old pin with pliers
  • Start with left side and push Shaft_Hinge_A from outside in the MakPak box
  • Add the screw from the outside and add Shaft_Hinge_B from the inside. Leave a bit space for the cover hinge
  • Add the cover and push Shaft_Hinge_C from the inside to hold the cover in place. Tighten it a bit
  • Use pliers to hold Shaft_Hinge_C. Tighten the screw fully

PS: yes, the screwdriver organizer will be uploaded too.

Tags