1 / 2
Multi-part Lifesize Mjolnir: The Hammer of Thor — image 1
1 / 2

Multi-part Lifesize Mjolnir: The Hammer of Thor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a multi-part version of Mjolnir based on the design used in the Marvel Cinematic Universe.

Rating
4.938 / 5
Likes
389
Downloads
1,283
Makes
17
Views
10,402
Reviews
16

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a multi-part version of Mjolnir based on the design used in the Marvel Cinematic Universe. It was designed in Fusion 360.
This is the parts list:
Hammer:
1x HammerBot.stl
1x HammerTop.stl
2x HammerEnd.stl
1x HammerCap.stl
4x Core Connectors
Each core connector has its clearance measurement in the file name. On my Prusa Mk3s, the .2mm works best.
8x Details
Both loose and tight detail files are included. I would recommend printing one of each and testing them for fit then printing more of whichever worked best.

Handle:
1x HandleBot.stl
1x HandleMid.stl
1x HandleTop.stl

This design also uses a 370mm x 3/4" wooden dowel rod to provide additional strength to the print. The handle parts also have registration pins for pieces of 1.75mm filament to keep them lined up.

I used 3D Gloop to assemble the entire design but any glue should work.

Tags