Ubiquiti UAP-AC-M (AC Mesh) Wall Mount Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print. Screw holes align with original. Good fit.
- Rating
- 4 / 5
- Likes
- 18
- Downloads
- 476
- Makes
- 2
- Views
- 1,498
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
These are easy to lose and break. I lost mine, then found it again and used it as inspiration to design this replacement from scratch.
This slides on and fits perfectly in my test print, just tight enough, and also the screw holes are the same width, and width apart as the original bracket.
If you would like to view the 3D model in colour in your browser and with optional AR, this is available directly at the Shapr3D viewer here.
Printing
Please print it in the orientation as per the main photo above. I used a brim just in case. Consider that if it is outside you may want more infill and also to use a more UV resistant material like ASA.
An 0.4 nozzle and a 0.2mm layer height worked well for me.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨