Rollbar Case for Orange Pi 5 Plus and Official Aluminum Heatsink and 40mm x 10mm fan.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A version of my Rollbar case for Orange Pi 5 Plus - but this one adds a fan.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 116
- Makes
- 0
- Views
- 921
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This is a simple little protect case/stand thing for an Orange Pi 5 Plus and the Official Orange Pi Aluminum Heatsink. This version of this case has a place to mount a 40mm x 10mm fan (not Noctua).
The heatsink this case works with has an Amazon # B0CJ9HTKMQ
The fan this is intended to work with has an Amazon # B07X6DJZPX
There is a place to mount a mesh screen above the fan. B09Y336F2R is the type of material I use. There is a part you can print as a guide to cut the material.
There's a place for rubber feet on the bottom. B073W1B3G1
The case is designed to be assembled with #4 x ½" self tapping screws. B07YFNJ5YK
If you use B013JRWCBU to connect the fan to the FAN connector on the board, the fan will turn on when the SOC reaches 55 degrees.
I have included a STP file which you can use to modify/remix.
If you find my things useful, considering sending me a few dollars through paypal. All proceeds go to buy whatever the next thing is (probably a Raspberry Pi 5 at this point).
I also have these on my Etsy.
https://www.etsy.com/shop/EsotericAvenue