DK-SF03GFC Backpack Strap Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the first prototype model of the DK-SF03GFC mount. This will be updated at a later date, so please wait if you
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
[General]
This is the first prototype model of the DK-SF03GFC mount.
This will be updated at a later date. So please wait for the update, if you don't have a 3D printer and plan to outsource to external fab to do the 3D printing.
Click below link to view a clip explaining how to use this.
https://x.com/sgTvxH7zDTBDD9d/status/1715065056856289318?s=20
[BOM]
・Printed Main body of mount x1pc
・Printed Mount Stopper x1pc
・Bungee cord (2mm) x15cm
・Shock cord adjuster x1pc
[Notice]
The following defects are present since I am still in the process of studying the shape.
So be careful when using the mount.
・When a strong impact is applied from below while the main unit is attached to the mount, the main unit may come off upward vigorously.
[Printing Configurations]
・Printed with PrusaSlicer original setting of MK4
・Filament: Prusament PETG
・Nozzle Diameter: 0.4mm
・Layer Height: 0.15mm
・Printed with Config: “0.15mm SPEED”
・Infill: 15%
・Generate Support: YES
[Disclaimer]
This mount has nothing to do with the original manufacturer of DK-SF03GFC, so do not contact the product manufacturer about this mount.
I do not guarantee any damage caused by the use of this mount, so please use it at your own risk.