Garklein Baroque Recorder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cylindrical bore recorder (fipple flute) with a range from C6 to A7.
- Rating
- 4.571 / 5
- Likes
- 67
- Downloads
- 985
- Makes
- 6
- Views
- 2,498
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I used pfh's excellent sopranino as a starting point. In the end, I only kept the original fipple, but having a functional and in-tune starting point a fifth down was invaluable.
On a well-calibrated printer it prints nicely in PLA upright without supports. I added a brim to ensure it didn't get knocked loose during printing. There are some non-trivial bridges at the block and fipple windway, but if axes & extruder are cal'ed and temperature is tuned, it's doable. I used 30% infill. Ensure that your extrusion is good and your filament is dry to achieve an airtight print.
It's fairly in-tune. Fingerings are a bit different than on soprano recorder, but can be found here:
https://www.mollenhauer.com/en/service/fingering-charts
UPDATE:
Here's the best intonated fingerings I've found so far for this design. I hope to update the design to further improve tuning in the future:
