Suspended Jack-O-Lantern Light
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€22.92 – €28.02 net (excluding VAT)
For file: AH_suspended jack-o-lantern.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €25.47 excluding VAT (range midpoint).
- Weight reported by the author
- 266 g
- Print time reported by the author
- 28 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
a suspended jack-o-lantern in a tombstone shaped frame with a slot for a tea light so you can light up the night!
- Rating
- 0 / 5
- Likes
- 41
- Downloads
- 152
- Makes
- 0
- Views
- 747
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial
This suspended jack-o-lantern comes with a slot in the back so you can insert a 1.5in diameter tea light inside so that you have that classic night time look!
simply slide the tea light in and gently place the cover over the opening.
- print in 0.2mm layer height
- no supports needed!
- make sure gaps between suspension lines and main body do not fuse!
- may need to activate print thin walls option if lines do not appear.
- make sure infill is at least 20% so that the line mounts do not fail.
I used some standard 1.5in dia x 1.4in ht tea lights (orange colored for extra blending in)
be extra careful when removing from build plate as inside and outside portions are only connected by thin lines which could break if both portions do not come off at the same time!