ICOM Radio holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.10 – €2.56 net (excluding VAT)
For file: radio holder v2_0.4n_0.2mm_PETG_MK4IS_1h40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.33 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 1.67 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holder for the radio that can be attached to the wall.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 192
- Makes
- 1
- Views
- 1,476
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Manufacturing instructions:
Material: PETG
3D Printer: FDM 3D printer, average print time 1h 45m (input shaper enabled on MK4).
Slicer settings: 0.2mm layer height, 5 perimeters
Post processing instructions: Clean stringing, install in selected location using two screws.