Nightlight "Sun and Moon"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nightlight with Sun and Moon that get separate lit
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
As my daughter is not very interested in staying in bed we discussed a way on what makes here know what is still “sleep” time and whats “day” time.
This is especially handy when sun is rising early and you still want to get some sleep.
Print front and back with some dark filamet and the middle parts with some diffusing translucent material.
I used two single WS2812B LEDs wired to an ESP8266 D1 Mini. I used ESPHome with following light config so i can control both LEDs individually while only using one GPIO Pin.
light: - platform: neopixelbus type: GRB variant: WS2811 pin: GPIO4 num_leds: 2 id: "nachtlichtsonnemondled" internal: True restore_mode: RESTORE_DEFAULT_OFF - platform: partition name: "Sonne" id: sonne restore_mode: RESTORE_DEFAULT_OFF segments: - id: nachtlichtsonnemondled from: 0 to: 0 - platform: partition name: "Mond" id: mond restore_mode: RESTORE_DEFAULT_OFF segments: - id: nachtlichtsonnemondled from: 1 to: 1
I also use the time integration to fade in and out
time: - platform: homeassistant id: homeassistant_time on_time: # Every morning on weekdays - seconds: 0 minutes: 55 hours: 6 days_of_week: SUN-SAT then: - light.turn_on: id: sonne brightness: 80% transition_length: 10min - light.turn_off: id: mond transition_length: 3min - seconds: 0 minutes: 50 hours: 19 days_of_week: SUN-SAT then: - light.turn_on: id: mond brightness: 17% transition_length: 3min - seconds: 0 minutes: 00 hours: 19 days_of_week: SUN-SAT then: - light.turn_off: id: sonne transition_length: 60min