1 / 6
Voron V0.2 (R1) Umbilical strain relief (super light) — image 1
1 / 6

Voron V0.2 (R1) Umbilical strain relief (super light)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Custom Umbilical Mount and Support for your Mini Stealth Burner

Rating
5 / 5
Likes
50
Downloads
302
Makes
6
Views
1,929
Reviews
6

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Designed in tandem with my Umbilical cover with strain relief found here…

https://www.printables.com/model/620960-voron-v0-v01-v02-v02r1-umbilical-cover-with-strain

I developed this custom mount for the widely used umbilical after using the generic one and the version from LDO.

I found that the cable connections would brake and stop the printer from working after about 200 hours or so.

in order to solve this I needed a solid cable clamp to remove the strain from the movements of the tool head and resulting in better reliability for the connectors.

this design has seen multiple iterations and I think this will be the final one. although the last design change was mostly cosmetic.

So I present to you my own version of the umbilical mounting!

 

  1. I have lowered the umbilical board and set it at 20 degrees to reduce the height of the cables to stop it from rubbing the top hat and means you no longer have to deal with those awful angle pieces from the LDO version.
  2. I've designed a “no loss” cable tie point for strain relief. (you just unscrew it when you want to disconnect from the board and it stays with the wiring loom!)
  3. I've added a flat shield to protect your wires that plug into the tool head board from rubbing on the motor blocks. 
  4. ive extensively shaved all unnecessary weight from the mount without compromising structural integrity.

To install this mod you will need

  1. 3 x M3 heatsets
  2. 3 x M3 x 6mm screws

these will be used to mount the board and the top part for the strain relief.
the original M3 screws are still used to mount to the back of the Mini Stealth Burner.

everything should be set to print straight away from the file.

If you have any feedback on this design please get in touch so I can further work to make this mod better!

happy printing!

Tags