1 / 9
RGB juggle cube / rgb jongleerbal / rgb jongleerkubus — image 1
1 / 9

RGB juggle cube / rgb jongleerbal / rgb jongleerkubus

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Also usable for other Light Emmiting Cube projects, but meant as a housing for jugglecube.

Rating
0 / 5
Likes
1
Downloads
12
Makes
0
Views
123
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

Behuizing van rgb jongleerkubus. Meer op https://www.circuitsonline.net/forum/view/message/2065202#2065202 en https://www.eluke.nl/2019/04/10/rgb-jongleerbal-jongleerkubus/

Maar ook bruikbaar als behuizing voor andere lichtgevende kubus- projectjes.

Also usable for other Light Emmiting Cube projects, but meant as a housing for jugglecube.

The middle fits a 50mm diameter 1.6mm thickness circuit board.

Print instructions are in .scad. I'd suggest translucent PETG for the halves and anything flexible for the middle (I used transparant flex45 TPE, which isn't even translucent but otherwise ok.)

Please let me know if this was useful for you and/or sent me a picture of your "make" :)

Print Settings

Printer:

Mendel90

Rafts: 

No

Supports:

No

Resolution: 

see notes

Infill:

concetric / honeycomb

Filament:

PETG and TPE/TPU or FlexPLA

translucent / natural

 

Notes:

 

print the halves wit a large nozzle and layer height, say 0.8mm / 0.5mm. For optical clarity.

Print the flexible part wit a 0.4mm or other small nozzle and "normal" settings, maybe a bit slower because it's flexible.

Post-Printing

montage

with m3 nuts&bolts and optionally eyelets for wiring connected to those bolts.

 

 

Tags