Bambu Lab A1 Mini AMS airtight box. Luftdichte Box! New holder.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to use the AMS in an airtight box. To fit in I designed a new holder.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 59
- Makes
- 0
- Views
- 2,949
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to use the AMS in an airtight box. To fit in I designed a new holder.
I bought this airtight box: IRIS Ohyama, 70 liters
https://www.amazon.de/gp/product/B06XXD6FHC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
First print out the parts.
0,2mm, no support. Brim needed.
On an A1 mini please print each Part (Teil) 1 and 2 two times.
If you rotate, two pieces of one part fit the bed.
Then print out Part 3.
Glue them together.
Mount the AMS and place it in the box.
Drill 4 holes for the PTFE and 1 hole for the connector.
Seal the holes. For the beginning tape will be ok. ;-)
Done!
If you like you can install PTFE passthroughs.