1 / 8
Wolverine 8mm / Super8 Film Scanner Mod for Larger Film Reels — image 1
1 / 8

Wolverine 8mm / Super8 Film Scanner Mod for Larger Film Reels

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These files allow larger film reels on the Wolverine 8mm / Super8 film scanner.

Rating
0 / 5
Likes
12
Downloads
128
Makes
0
Views
1,466
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

These files allow someone with a Wolverine (or similar) 8mm / Super8 film to digital scanner to use larger film reels on their unit.  The largest mine could use was a 5-inch reel and I had a number of 7-inch and 9-inch reels that needed conversion.  I could have cut the film into smaller lengths and put them onto smaller reels but I didn't want to do that.  The solution was to make extension arms for the left and right side of the film converter.  

To use the arms, you will have to drill appropriately spaced holes in your case.  Use the printed arms as a guide for drilling the holes. Open up your converter and epoxy a couple #10 nuts over those holes inside the unit.  Once the epoxy has hardened, close the case back up and screw in the #10 bolts.  These bolts allow you to hang the arms from the left and right sides of the case. The arms also require two 608 bearings (glue into place) and two appropriately sized bolts so you can hang your film reels from them.

The drive axle is placed on the rewind drive axle.  The pulleys are placed on the rewind extension arm bolt.  Use an appropriately sized rubber band to drive the rewind. You want GENTLE tension. Too much tension will warp the arms.

Alternatively, you can just let the film fall into a container while its running so the rewind end doesn't make your film jump as it's being scanned.  This is actually the recommended method!

See the photos for more information on its setup.

FYI search Printables for other 8mm / Super8 models.  There's larger film reels, 8mm to Super8 reel converters, film cases, etc.

Tags