1 / 6
Book of the Dead Blu-Ray DVD case with Living (Undead) hinge — image 1
1 / 6

Book of the Dead Blu-Ray DVD case with Living (Undead) hinge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A necronomicon case for my Evil Dead 2 DVD that was not in a case

Rating
0 / 5
Likes
44
Downloads
146
Makes
0
Views
1,199
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I had to make some changes to get the living hinge working properly.  The top and bottom stl files are snapshots of what worked best so far. I am now providing a .3mf file from which the page decorations can be removed or changed.  If you want scarier page graphics, check out the “necro-library” link.  Just import jpgs into 3d builder or a similar app and convert to stl.

 

The cover is a ready to slice .3mf file.  I cannot print the whole hinge at once with my printer, but if you have a large format printer, use CoversMerged.  Print the first layer in a tough PLA for durability.  If you have a large format printer, you can cut off the flap from the bottom piece and then simply glue the cover around the box. 

I went with 0.2 layer height so that the first layer flexes in the hinge area (Hopefully)

My preferred decorations are a couple of layers of ProtoPasta “Amie's Blood of My Enemies” over one or two layers of “Bottle Brown” translucent HTPLA.

My final version uses Inland Matte Wood Rainbow for the cover and the rest of box.

 

Assembly:

  1. glue front cover to box top with the edges flush. there should be about 2mm between the inside edge of the top and the flexible line between the front and the spine of the cover
  2. give that enough time to set then assemble the top and bottom of the box so that it closes correctly
  3. glue the inside of the spine to the outside of the flap from the box bottom.  wrap tight rubber bands around the whole thing to hold the spine/flap in alignment while it sets
  4. glue the back cover onto the outside of the box bottom leaving enough clearance for the box to be opened and closed.  It's a little tight.  

 

If I have time later, I might explore ways to print the whole hinge together with the box parts at a steep angle so that it all fits in my print volume. 

 

Tags