1 / 5
Bambu Labs X1C P1S P1P Silicate Dry Box Container
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flat and simple container to use inside your printer.
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 304
- Makes
- 1
- Views
- 2,188
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Quick creation of a flat container for silica gel to use inside your Bambu Lab printer. Complete print file.
Lid is a tight fit - you need to work it slowly with force in. Spacing of holes ist 1.5 mm - smaller desiccant will fall through. Don't overfill. Fits snug into your printer and won't move or shake.
You need to glue the two holding pins in place after the print.
Print with 0.4 nozzle with standard settings. I used PLA for my version, you might want to consider PETG if the chamber temp will rise above 50°C.