Battle Cannon Pump Edited for External Priming Bars
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Changed dimensions to work with bolts I had lying around. Now works with external bars.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the pump grip parts from Dan's Battle Cannon mod, found here: https://www.thingiverse.com/thing:3058433
Too lazy to machine internal priming bars, so I made it longer and added holes at the back for bolts. Not sure what size bolts I have, It might be 1/4" . Test a few and find out, they should lightly thread into the holes with the head being flush. Mine are rounded head bolts that are fastened with a 1/4" hex key. You will likely have to cut down the internal ridge on the grip that stops the grip from moving farther forward, from my measurements there just barely might not be enough travel with out that.
Files likely not orientated correctly for printing, I used 3 walls 30% infil, probably need supports on the hole, YMMV.