Halloween Alien Xenomorph - HUEFORGE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Halloween themed alien xenomorph. Only 3 color swaps. Bing AI image. Personal HF license.
- Rating
- 0 / 5
- Likes
- 101
- Downloads
- 268
- Makes
- 1
- Views
- 3,001
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
0-0.6mm is solid black no details, you can easily add a height range modifier to print 0-0.6mm in 0.2mm layer height to save time but be sure to add the changes at the correct heights because the layer numbers will change if you use a height modifier.
Filaments Used:
PLA Creality Black Transmission Distance: 0.2
PLA+ Sunlu Orange Transmission Distance: 9
PLA Creality EN Yellow Transmission Distance: 2.4
PLA Creality Value White Transmission Distance: 7.2
Swap Instructions:
Start with Black
At layer #9 (0.84mm) swap to Orange
At layer #20 (1.72mm) swap to Yellow
At layer #23 (1.96mm) swap to White for the rest.
The STEP file is NOT a step file. If you own HF feel free to customize or make any changes for your filament or even make it better. Rename .STEP to .HFP and you'll have my hueforge project on it.