Subnautica Inspired Advanced Wiring Kit Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A functional prop inspired by the look of the Advanced Wiring Kit item from Subnautica.
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 228
- Makes
- 2
- Views
- 1,383
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Public Domain
A functional prop inspired by the look of the Advanced Wiring Kit item from Subnautica.
Printing Instructions
No supports are required. All pieces can be printed with lightning infill.
Glue is recommended but most of the pieces, aside from the Lid Lights, will snap into place at 100%. I was able to assemble it without issue at 50% and 100% using CA glue.
Lid.stl
Print 2 layers of grey with a pause on the 3rd layer. Switch to black for the remainder of the print.
Lid Light.stl
I used 1 layer of light blue with a pause on layer 2, then switched to blue glow filament for the remainder of the print.
Handle.stl
Print slowly and with adequate cooling to avoid sags at the corners due to short layer duration.