1 / 1
Print-in-place jiggle skeleton
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printed version of one of those jiggle skeletons you would find at a Dollar Store. (work in progress)
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 116
- Makes
- 1
- Views
- 704
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution
A 3D printed version of one of those jiggle skeletons you would find at a Dollar Store. (work in progress and any suggestions would be greatly appreciated)
Features
- arms and legs have joints
- around 6cm tall
- prints in place
- 0.2mm tolerance horizontally and 0.1mm tolerance vertically
- Mounting hole in head so you can attach it to whatever you want (e.g. keyring, necklace …) Printing recommendations
- use ironing for best results
- 10% infill should do
- as of now you will need to use a smaller nozzle size than 0.4 other wise it will not work unless you print 200% size you have been warned (if you have a resin printer you will be fine)
(print the v3 it is better)