Boostane Mount for S550 Mustang
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for Boostane/Octanium cans for S550 Mustangs.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 18
- Makes
- 0
- Views
- 372
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This mount sits perfectly at the tire inflation kit in my 19 PP1 GT. It reuses the existing bolt/fastener and the lid of that space also keeps the can from bouncing around. It works great with Octanium cans but it was made using dimensions from a Boostane can, I believe they are the same. I'll be testing with a Boostane can shortly. I can't verify that it'll work for other configurations.
Obviously, you'll want to print this in at least ABS though PETG MAY work depending on your location. It's friction fit (clamps the can) so it it deforms it'll fail (as I've experienced with PETG prints outdoors in our heat).
You'll need a bit of hardware, these were added to let this be as print-friendly as possible. No supports are needed.
(2) M4x18 (though this could be longer)
(2) M4 Nuts
(4) M3x20 (these can be a fair amount shorter, I just used what I had. I believe that as short as 10 will work)