2.5" to 3.5" SSD HDD Bay Adapter - Screwless
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.38 – €1.69 net (excluding VAT)
For file: 2.5_ to 3.5_ SSD Adapter V2_0.4n_0.2mm_PETG_MK4IS_1h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.53 excluding VAT (range midpoint).
- Weight reported by the author
- 28 g
- Print time reported by the author
- 1.2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
2.5" SSD/HDD to 3.5" bay adapter made in accordance with the official 2.5" and 3.5" drive specifications.
- Rating
- 5 / 5
- Likes
- 405
- Downloads
- 4,676
- Makes
- 50
- Views
- 12,516
- Reviews
- 41
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Universal 2.5" SSD/HDD to 3.5" HDD bay adapter.
No screws required
Supports side rails
Recommended to print in PETG
No supports required
NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA connector designed for 3.5" drives. For that purpose you can use https://www.printables.com/model/627541-25-hdd-to-35-nas-bay-adapter