MK3.9 + MK4 Better X-end-idler with easy smooth rods removal feature
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I added the feature to allow for smooth rods removal without disassembly of the whole x-Axis-Assy.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 97
- Makes
- 1
- Views
- 1,226
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
This is a Remix of the original Prusa “x-end-idler-R2.stl” for the MK3.9 and MK4. I added a feature to allow for smooth rods removal without disassembly of the whole x-Axis-Assy.
Due to the fact, that Pursa is using M3x16 Screws as “registration element” to position the smooth rods, it was easy to implement this feature.
!!! Important !!!
In order to be able to remove the lower smooth rod, you need to loosen the 4 screws, that hold the x-end-clip, to lift up the LM10UU linear bearing just 2-3 mm to allow the rod to slip underneath the LM10UU linear bearing out of the x-end-idler.

Hint for print post processing
If you have access to an 8mm Reamer, drive it thru both smooth rod bores, to allow for easy removing without the need of excessive force.
Print instructions ( copied from Prusas “MK4/MK3.9 printable parts” page )
Download the latest PrusaSlicer and use the following settings**:
- Print settings: 0.20mm QUALITY
- Filament: PETG (tested on Prusament)
- 15% Grid infill
** Note that print settings are recommended, but you can experiment with your own.